Kinetic Research Group’s Whiskey-3 Chassis has great features that allow the shooter to set the chassis up to their particular shooting style.
Forend
PolymerThreaded mounting holes at various positionsAccess hole for action mounting screw (allows for the action to be removed without removing the forend)Side mounting options for railFlush mount QD sling plateExternal QD cup on both sides of forendChassis
Designed for 5- or 10-round AICS magazines (Rem 700 LA uses CIP-length AICS magazines, Badger M2008 version uses AI AW 10-round double stack magazines)Tikka chassis have V-Bedding; Rem 700 chassis have Radius system. Both are CNC’d into aluminum backbone.Hardened stainless steel recoil lugRem 700 chassis can accommodate larger aftermarket recoil lugsWill accept any barrel contour up to 1.25” straight cylinder (no larger than .9” at the muzzle recommended)Trigger Guard/Mag catch
Made of reinforced polymer (Tikka T3 chassis has aluminum)Will accept stock Tikka T3 triggers or Barnard triggersRem 700 chassis will accept the new x-mark triggers and most aftermarket triggersMag catch is low profile to reduce snags but still provides excellent ergonomics and controlMagazines Used
Remington 700 short action and Tikka T3 use AICS either 5 or 10 round .308 magsRemington 700 long action and Badger M2008/13 long action use .338 CIP length magazinesMagazines are not includedFolding Mechanism
Main latch uses lever style lockup with tapered design which allows lockup through wear of the systemSecondary latch locks the buttstock into the folded positionLatch components are made of hardened stainless steel and nitride high strength chromoly steel.Cheekpiece
Infinitely adjustable within cheekpiece range (1” travel)Quickly removed and re-installed using a clamp and thumbscrew designSimple feature allows the cheekpiece to return it to the exact height it had been setMade of polymerButtstock
Length of pull is between 13.3” to 15.3” depending on versionLength of pull is adjustable in 1/4” increments for a total of 2” adjustmentCNC milled from billet aluminumButtpad moves vertically to set positions within rangeButtpad has tool-less adjustmentsButtpad can tilt 15° to each sideMounting features
Buttstock has QD sling mount on each sideHarris bipod stud is included on the forendAll stocks come with one MOE L2 and MOE L3 railMaterials
Most Aluminum parts are Type III hard anodizedFasteners are stainless steel with black oxide coatingSteel parts are salt bath nitrided or stainless steelGrip panels are injection molded reinforced polymerThe Whiskey-3 Chassis is available for the following inlets:
Tikka T3 (non-magnum length calibers)Remington 700 (short and long action)Sako TRG-22 and TRG-42Sako M995Download the Whiskey-3 Chassis Installation Instructions here.
Specifications:
